The PS52404GCM is a full gigabit L2+ managed PoE network switch. It has 24*10/100/1000Base-T RJ45 ports and 4*100/1000Base-T(X) TP/SFP Combo ports. Ports 1-4 support IEEE802.3af/at, and 1-24Ports support IEEE802.3af/at standard PoE power supply. As a PoE power supply device, it can automatically detect and recognize the power-receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as Ball-shaped, wireless base station, POS terminal camera, wireless AP, IP camera, VoIP phone, and building visual access control intercom through a network cable to meet the network environment that needs high-density PoE power supply, suitable for hotels, campuses, parks, supermarkets, scenic spots, Factory quarters and SMB small and medium-sized enterprises form a cost-effective network.
The PS52404GCM has L2+completel network management, support IPV4 management, static route line rate forwarding, security protection mechanism, complete ACL/QoS policy, and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) to improve link backup and network reliability. Communication can be quickly restored when a one-way network fails to ensure meaningful, uninterrupted application communication. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.
| |
|---|
| Model | PS52404CM |
| Physical Port | |
| RJ45 port and speed | 24x10/100/1000Base-TX/4COB 10/100/1000Base-TX |
| Fiber port and speed | 4x100/1000Base-FX SFP |
| Parameters | |
| Ethernet standards | IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.3az IEEE802.3ah IEEE802.1X IEEE802.1Q |
| Packet buffer | 4Mbits |
| Maximum packet length | Up to 10KBytes |
| MAC address table | 8K |
| Transmission mode | Store and Forward(full/half duplex mode) |
| Exchange property | Delay time: < 7μs Backplane bandwidth: 1Gbps Packet forwarding rate: 148810 (64Byte) |
| PoE | |
| PoE standard | 24x IEEE 802.3af /IEEE 802.3at PoE |
| Power budget | Max. PoE output power budget 30W |
| LED Indicator | |
| Power | Connect-always |
| RJ45 | Link/SPD: connect-always; data exchange-twinkle Speed light: 100Mbps-always; 10Mbps-twinkle |
| Fiber | Link/Act: connect-always; data exchange-twinkle |
| Power Information | |
| Power access mode | Phoenix terminal |
| Redundant power input | DC 48-56V |
| Overload protection | Yes |
| Power reverse | Support |
| Power consumption | Full-load<15W |
| Physical Property | |
| Protection grade | IP40 aluminum case |
| Cooling mode | Natural cooling, no fan design |
| Dimensions | 440mm x 310mm x 44mm (L x W x H) |
| Installation mode | Rack Mounting |
| Weight | 3000g |
| Working Environment | |
| Operating Temperature | -40℃~75℃ |
| Operating Humidity | 5%~90% non-condensing |
| Storage Temperature | -40℃~85℃ |
| Warranty | |
| MTBF | 500,000 hours |
| Defects Liability Period | 5 years warranty, lifetime technical support |
| Certification Standard | |
| EMI | FCC Part15 Subpart B Class A,EN 55022 Class A |
| EMS | EN61000-4-2(ESD), EN61000-4-3(RS), EN61000-4-4(EFT), EN61000-4-5(Surge), EN61000-4-6(CS), EN61000-4-8, EN61000-4-11 |
| Collision | IEC60068-2-27 |
| Drop | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety grade | EN60950-1 |
Gigabit access, Gigabit SFP fiber port uplink
- Support the “Gigabit Ethernet port and Gigabit SFP port” combination, enabling users to build networking to meet the needs of various scenarios flexibly.
- Support non-blocking wire-speed forwarding.
- Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.
Intelligent PoE power supply
- 1-24Ports 30W output, meeting various high-power terminal application scenarios.
- 3af/at PoE standard, without damaging non-PoE devices.
- The priority system for the PoE port will first supply power to the high-priority level port when the power budget is insufficient and avoid overwork of the device.
- PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
Strong business processing capability
- 1Q VLAN, flexible VLAN division.
- QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
- ALC filter data packet by configuring matching rules, processing operation & time permission, and providing flexible and safe access control.
- IGMP V1/V2 and IGMP SnoopingV1/V2/V3.
- STP/RSTP/MSTP/ERPS(G.8032)
- Static and dynamic aggregation.
Security
- 1X authentication.
- Port isolation, Storm control.
- IP-MAC-VLAN-Port binding.
Stable and reliable
- It has low power consumption, galvanized steel casing, And active fan cooling.
- Self-developed power supply and high redundancy design provide a long-term and stable PoE power output.
- CE, FCC, RoHS.
- The user-friendly panel can show the device status through the PWR, Link, and PoE LED indicator.
Easy operation and maintenance management
- Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
- HTTPS, SSLV3, and SSHV1/V2.
- RMON, system log, LLDP, and port traffic statistics.
- CPU monitoring, memory monitoring, Ping test, and cable diagnosis.
