130W/52V Desktop Power Adapter

Input Voltage	AC90-264V
Frequency Range	47Hz~63Hz
Output Power	130W
Output Voltage	52VDC
Output Current	2.5A

Input Voltage

AC90-264V

Frequency Range

47Hz~63Hz

Output Power

130W

Output Voltage

52VDC

Output Current

2.5A

Input:
Input Voltage Range：90VAC~264VAC
Input Rated Voltage Range：100VAC~240VAC
Frequency Range：47Hz~63Hz
Efficiency：91%
Leakage Current：input to output less than 0.25mA

Output:
Group Of Output：1
DC Voltage：52VDC
Default Output Current：0-2.5A
Temperature Coefficient：±0.03%/℃

Output Protection：
Over Power
Over Voltage
Over Current
Short Circuit

Environment:
Operation Temperature and Humidity: -20℃~65℃; 20%~90%RH No condensing
Storage Temperature and Humidity: -40℃~85℃; 5%~95%RH No condensing

Certification:
3C.CE.FCC.EMI/EMC

Safety And EMC Standard
Electromagnetic Interference: EN55022 Class A
Harmonic Current: IEC61000-3-2 class A equipment requirements
Electromagnetic interference Immunity: EN61000-4-2,4,5,6,8,11 ENV50204, class A heavy industry standard


Product Name	130W/52V Desktop Power Adapter
Model	AP130-52
Group of Output	1
DC Voltage	52V
Default Output Voltage	50.00-53.00V （Vin: 220VAC / LOAD: 0A）
Output Rated Current	2.5A
Output Current Range	0-2.5A
Output Rated Power	130W
Total Peak Output Power	Up to 180W(Sustainable time 10S/220VAC)
Peak Output Current	3.5A( Sustainable time 10S/220VAC)
Ripple Noise	0＜Ta≤55℃,≤50mVp-p ;-15≤Ta≤0℃,≤100mVp-p
Stabilized Voltage Precision	±1%
Line Regulation	±1%
Load Regulation	±1%
Temperature Coefficient	±0.03%/℃
Output Start Time	≤3.0S (120Vac input, Full load); ≤2.0S (220Vac input, Full load)
Output Hold Time	≥10mS(120Vac input, Full load); ≥20mS(220Vac input, Full load)
Voltage Overshoot	<5.0%
Input Voltage Range	90~264VAC
Input Rated Voltage Range	100~240VAC
Frequency Range	47Hz~63Hz
Efficiency	91%
Input Current	<1.1A
Inrush Starting Current	<40A@300Vac Cold start
Leakage Current	input to output less than 0.25mA
Over power protection	156~195W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)
Over voltage protection	59-60V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.
Over current protection	3~3.2A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)
Short circuit protection	It can be short circuited for a long time and automatically recover after the short circuit is eliminated.
Operation Temperature and Humidity	-20℃~65℃; 20%~90%RH No condensing
Storage Temperature and Humidity	-40℃~85℃; 5%~95%RH No condensing
Security Standard	GB4943/EN60950
Dielectric Strength	Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min.
Insulation Resistance	Input-Output: 100M ohms; Input-Case: 100M ohms; Output-Case: 100M ohms;
Electromagnetic Interference	EN55022 Class A
Harmaonic Current	IEC61000-3-2 class A equipment requirements
Electromagnetic interference Immunity	EN61000-4-2,4,5,6,8,11 ENV50204, class A heavy industry standard
Design MTBF	100,000Hrs AT 25℃, MIL-217 Method 2 Components Stress Method
Product size(LWH)	1727234mm
Certification	3C.CE. FCC.EMI/EMC
Notes	If the specification is not specified, all specifications and parameters shall be measured at rated input, rated load and 25 C ambient temperature. Ripple noise test method: the use of a 12# twisted pair, while the terminal to parallel capacitance of 0.1uF and 10uF, measured at the scope of the oscilloscope 20MHz bandwidth. The power supply will be installed on the final equipment as a component, and the final equipment will still have to meet the EMC condition.